All Markian products are designed to look good and last long after they’re purchased. A little care and attention will ensure each product maintains its appearance for years to come. An important consideration is the placement of the product. Think about its exposure to heat and humidity which may cause fading (in fabrics) or expansion and cracking (in timber). Avoid placing in direct sunlight where possible.

ANODISED ALUMINIUM

Wipe with a clean cloth to remove any dirt or dust. Avoid the use of any abrasive cleaning products. For stubborn marks, wash with warm water and a mild soap, and rinse with warm water.

CERAMIC

Wipe with a clean cloth to remove any dirt or dust. Use only lint-free cloths as fibres may be torn off when cleaning the rougher surfaces of stoneware.

FABRIC

Vacuum regularly, ideally every week at half power, to remove any dirt or dust. Clean any spills as soon as possible, and refer to specialist fabric cleaners for difficult to remove stains. We also recommend keeping fabric out of direct sunlight to maintain colour. Refer to individual upholstery manufacturer’s instructions for specific care

LEATHER

Leather will naturally age and soften over time to reveal its natural beauty. Vacuum any dust and dirt with the soft brush attachment and then wipe with a clean cloth every few weeks or when necessary. Use quality cleaning products if necessary, but avoid using water as this may leave marks, Note: some scars and scratches from the cattle hide may be visible and are a characteristic of genuine leather.

GLASS

Glass is particularly susceptible to damage and should be treated with care, particularly during installation. To maintain, simply wipe the product with a clean cloth to remove any dust. If necessary, use a household glass cleaner to remove marks and wipe with a soft cloth or paper towel to avoid streaks. Please ensure all lights are turned off prior to commencing cleaning or maintenance.

LAMINATE / VENEER / POWDER COATED MDF

Wipe with a clean cloth to remove any dirt or dust. If using water, care should be taken to ensure water does not pool on edge as with may reduce veneer or laminate bond.

MARBLO

All Marblo® materials enjoy extended life-of-use as compared to most interiors products. The material's superior durability and ability to be easily repaired and refinished back to its original condition, means that a Marblo® installation will continue to provide years of service well after others require replacement. They are also VOC lcw­emitting and do not off gas nor contain heavy metals or formaldehydes.

All Marblo materials are intended for INTERIOR USE ONLY, direct sunlight may eventually cause fading, yellowing or possible distortion of the material in excessive heat conditions. In some applications, light solid colours have been used for exterior applications.

To clean, simply use warm, soapy water to remove stains. Ensure the use of coasters under all glasses, particularly those with alcohol or citrus juices. Clean up all spills immediately, as liquid on the surface may penetrate the surface and leave staining. In most cases this can be sanded back and refilled, but careful use will ensure longer enjoyment of the product.

MIRROR

Mirror is particularly susceptible to damage and should be treated with care, particularly during installation. To maintain, simply wipe the product with a clean cloth to remove any dust. If necessary, use a household glass cleaner to remove marks and wipe with a soft cloth or paper towel to avoid streaks.

 

PAINT / POWDER COAT

To remove dirt and dust, wipe with a damp cloth. Never use strong solvents to clean power coated surfaces. Revive dull surfaces using car polish.

PRODUCT INSTRUCTIONS

We’d be happy to send you Product Instructions for your product. Please fill in the information below and we will send you the requested Product Instructions in PDF format within 24 hours.